Skip to content

Service Air Conditioner Tips

  • by

Service Aircon intends to service the air conditioning components of your house or office. Oftentimes, the units will be working fine and you may not even see that there are issues with it. However, you should always ensure appropriate ac servicing for optimum performance of your air conditioning system. This will lower energy cost, protect against the breakdown of parts, and optimize air-conditioning’s energy efficiency. Thus, it is necessary that routine air conditioner maintenance is completed in order to maintain your ac system in great form. The actions listed below will guide you in conducting regular air conditioner maintenance.


To begin with, you have to recognize the service areas of your air conditioning system. In case you have somebody beside you who can provide you a visual overview of what each part does, then this is quite convenient. You can also try taking a look at the manual or the device manual when you are inspecting it. It’s highly advisable to look at the ducts also.


When you’ve identified all the parts of your ac units, make a note of the places. Put them in the order of easiest access to the support staff. Remember that it is not just suitable for your service staff but also for to service your ac units at the most convenient manner.


Now that you have identified the support points of each air conditioning component, wash each one with soapy warm water. Always wash the parts with a detergent that contains chlorine so as to ruin any germ that lives in there. This will avoid the spread of germs and illnesses. After cleaning the components, rinse it with water, and then leave it to dry.


1 important thing to bear in mind when taking out old ac units is that the filter has to be replaced often. You are able to replace the filter if it’s dirty or obstructed. As soon as you’ve replaced the filter, then place the empty air runs indoors, secure them with air clips, and then replace the cap. 


Now that the air-con ducts are set up, close all of the support aircon ducts, and flip your air conditioner on. Turn it on as soon as it is cool enough outside. If you find that the air conditioner is not yet cool enough, then you need to open the windows slightly and move the fans to circulate the cool air in the room. Await the air temperature to fall under the 50-degree limit. Then you need to replace the cap onto the ducts in addition to pulling out the old aircon filter.


Replace the cover on the air-con ducts together with the new one. Take off the air filter to enable the filter to dry before reinstalling it. Make sure the aircon ducts are placed so that the air intake vents confront the front of the house. Additionally, ensure that all three air intake vents are connected firmly to the device.


In the end, turn on the aircon service ducts, and examine the airflow to make sure that the air is operating smoothly. If the atmosphere is not functioning smoothly, then there may be a blockage somewhere in the system. You need to eliminate the blockage before you can run the service aircon ducts again. To do it, you will require a tool like an adjustable wrench, pliers using a blade to grip the turn bolt, and a socket wrench. The service aircon ducts will only operate for as long as it’s required.

If all this sounds like too much trouble, why not just buy a new air conditioning unit? Many specials are available to suit your budget.